RG® Series batteries - Valve Regulated Lead Acid (VRLA). The Concorde turbine starting battery will outperform a well serviced nickel cadmium at low temperatures, provide safe and reliable operation at high temperatures, and is capable of multiple engine starts with short flight durations.
Certified battery for turbine and piston engine aircraft models
Certified nickel cadmium battery replacement in many aircraft
Superior starting power
Reliable essential power in the event of a generator failure
Low impedance design
Maintenance free
Constructed with non removable vent valves - no addition of electrolyte or water required
Internal AC Heater - 115VAC
Internal DC Heater - 28VDC
Factory tested to assure airworthiness
Shipped fully charged
RG® Series batteries ship HAZMAT EXEMPT
RG-380E/60KH is a fire resistant powdered coated aluminum container and cover with integrated side louvered vents. Fabric lifting straps and hold down bar attached to cover.
**Concorde RG-380E/60KH assembly as shown in the photo above consists of the RG-380E/60KH battery and a Heater Control Unit (HCU). HCU types vary in style for use in multiple configurations. For HCU information please reference Concorde Battery Accessories.
Aircraft
Accessories
Accessory
Description
HCU-1 Heater Control Unit Assembly
Application: The HCU-1 Heater Control Unit is designed for use with RG Series batteries containing internal heating elements. An HCU must be installed on the heated series of Concorde TSO batteries in order for the battery assembly to operate as designed. For more information click here
HCU-2 Heater Control Unit Assembly
Application: The HCU-2 Heater Control Unit is designed for use with RG Series batteries containing internal heating elements.An HCU must be installed on the heated series of Concorde TSO batteries in order for the battery assembly to operate as designed. For more information click here
HCU-3 Heater Control Unit Assembly
Application: The HCU-3 Heater Control Unit is designed for use with RG Series batteries containing internal heating elements. An HCU must be installed on the heated series of Concorde TSO batteries in order for the battery assembly to operate as designed. For more information click here
HCU-4 Heater Control Unit Assembly
Application: The HCU-4 Heater Control Unit is designed for use with RG Series batteries containing internal heating elements. An HCU must be installed on the heated series of Concorde TSO batteries in order for the battery assembly to operate as designed. For more information click here
HCU-7X Heater Control Unit Assembly
Application: The HCU-7x Heater Control Unit is designed for use with RG Series batteries containing internal heating elements. An HCU must be installed on the heated series of Concorde TSO batteries in order for the battery assembly to operate as designed. For more information click here
The data/information contained herein has been reviewed and approved for general release on the basis that this document contains no export-controlled information.
It is the installers responsibility to verify the aircraft manufacturer's original battery part number and verify the installation approval prior to installation. Installations listed may require the purchase of an STC, STC Kit, or alternate installation approval. Contact Concorde or the Certificate Holder for installation details.
Competitor cross references provide the closest Concorde battery to fit and capacity. Please verify competitor battery specifications against the replacement you select to ensure proper fit ahead of product selection. It is the installers responsibility to verify the installation approval prior to installation. In some cases, the cross-reference battery is not the battery that is approved for installation in the application. Please also check the application guide for installation approvals for your aircraft to ensure certification.
General Aviation Batteries 
Turbine Starting Batteries
Emergency Batteries
Military Batteries
Safety Data Sheets
Knowledge Center
Where to Buy
Recycling