Concorde recombinant gas (RG® Series) valve regulated lead acid (VRLA) heated batteries for engine starting and emergency / essential power applications are constructed with cutting edge Absorbed Glass Mat (AGM) technology. Concorde™s proprietary PolyGuard® Microporous Polyethylene Separator shields the positive plates against shorting, shock or vibration. No other manufacturer offers this dual layer insulation protection feature.
Superior starting power
Reliable essential power in the event of a generator failure
Low impedance design
Maintenance free
Constructed with non removable vent valves - no addition of electrolyte or water required
Internal AC Heater - 115VAC
Internal DC Heater - 28VDC
Factory tested to assure airworthiness
Shipped fully charged
RG® Series batteries ship HAZMAT EXEMPT
RG-380E/44KH is constructed in a flame resistant powder coated aluminum container and cover with side louvered vents and a hold down bar. Fabric lifting straps are incorporated for ease of handling.
**Concorde RG-380E/44KH assembly as shown in the photo above consists of the RG-380E/44KH battery and a Heater Control Unit (HCU). HCU types vary in style for use in multiple configurations. For HCU information please reference Concorde Battery Accessories.
Aircraft
Accessories
Accessory
Description
HCU-1 Heater Control Unit Assembly
Application: The HCU-1 Heater Control Unit is designed for use with RG Series batteries containing internal heating elements. An HCU must be installed on the heated series of Concorde TSO batteries in order for the battery assembly to operate as designed. For more information click here
HCU-2 Heater Control Unit Assembly
Application: The HCU-2 Heater Control Unit is designed for use with RG Series batteries containing internal heating elements.An HCU must be installed on the heated series of Concorde TSO batteries in order for the battery assembly to operate as designed. For more information click here
HCU-3 Heater Control Unit Assembly
Application: The HCU-3 Heater Control Unit is designed for use with RG Series batteries containing internal heating elements. An HCU must be installed on the heated series of Concorde TSO batteries in order for the battery assembly to operate as designed. For more information click here
HCU-4 Heater Control Unit Assembly
Application: The HCU-4 Heater Control Unit is designed for use with RG Series batteries containing internal heating elements. An HCU must be installed on the heated series of Concorde TSO batteries in order for the battery assembly to operate as designed. For more information click here
HCU-7X Heater Control Unit Assembly
Application: The HCU-7x Heater Control Unit is designed for use with RG Series batteries containing internal heating elements. An HCU must be installed on the heated series of Concorde TSO batteries in order for the battery assembly to operate as designed. For more information click here
The data/information contained herein has been reviewed and approved for general release on the basis that this document contains no export-controlled information.
It is the installers responsibility to verify the aircraft manufacturer's original battery part number and verify the installation approval prior to installation. Installations listed may require the purchase of an STC, STC Kit, or alternate installation approval. Contact Concorde or the Certificate Holder for installation details.
Competitor cross references provide the closest Concorde battery to fit and capacity. Please verify competitor battery specifications against the replacement you select to ensure proper fit ahead of product selection. It is the installers responsibility to verify the installation approval prior to installation. In some cases, the cross-reference battery is not the battery that is approved for installation in the application. Please also check the application guide for installation approvals for your aircraft to ensure certification.