Aircraft Battery Accessories - BC-7000 Battery Capacity Tester
BC-7000 Battery Capacity Tester
Order as Part Number 4167
BC-7000 Battery Capacity Testor Operations Manual
BC-7000 Field Calibration Procedure 55 AMP (Rev. 9/8/2012)
The BC-7000 Battery Capacity Tester from Concorde. Create accurate reports straight from the computer. USB Port access required.
Fully automatic testing for 12 Volt AND 24 Volt Lead Acid or Nickel Cadmium Aircraft Batteries.
Tests both 12V and 24V lead acid batteries with capacity ratings from 0.5 AH to 50 AH
Adjustable End Point Voltage (EPV)
Battery discharge mode to 1V EPV
Adjustable Constant Current loads in 0.1 Ampere increments from 0.5 Ampere to 15 Ampere plus or minus 1.5%
Adjustable Constant Current loads in 1.0 Ampere increments from 15 Ampere to 50 Ampere plus or minus 1.0%
Universal AC power input 85~264vac (47 to 63Hz)
10mv voltage resolution
Audio warnings for completion of capacity test or a malfunction of the process
Certified InstallationsClick below for certified FAA installations of this accessory.
This battery accessory fits the following batteries:
BC-7000 Battery Capacity Tester|
This does not denote certified installations by the FAA.
The data/information contained herein has been reviewed and approved for
general release on the basis that this document contains no
Adobe Acrobat Reader is required to view PDF files. This is a free program available from the Adobe Website. Follow the download instructions on the Adobe Website to get a copy Adobe Acrobat Reader.